dynare issueshttps://git.dynare.org/Dynare/dynare/-/issues2020-06-15T10:29:17Zhttps://git.dynare.org/Dynare/dynare/-/issues/1730Consider saving results using -v7.3 flag2020-06-15T10:29:17ZJohannes Pfeifer Consider saving results using -v7.3 flagWe may want to consider saving the results of a Dynare run using the `-v7.3` flag, which available after Matlab R2006b. That would help getting around occasional issues with the 2GB file limit otherwise present.We may want to consider saving the results of a Dynare run using the `-v7.3` flag, which available after Matlab R2006b. That would help getting around occasional issues with the 2GB file limit otherwise present.https://git.dynare.org/Dynare/dynare/-/issues/1713Decide minimal MATLAB version requirement for Dynare 4.72020-09-03T14:45:14ZSébastien VillemotDecide minimal MATLAB version requirement for Dynare 4.7We need to decide what will be the minimal version of MATLAB required to run Dynare 4.7.
For Dynare 4.6, our policy has been to support MATLAB versions that are at most 10 years old.
Assuming that Dynare 4.7 is released in 2021, keeping the same policy would imply raising the minimal MATLAB version to R2011a or R2011b (depending on the exact release date).
But we could also decide to change our policy and support less versions. For example, we could go for a 5-years windows, which would imply R2016a or R2016b. Or we could choose something between 5 and 10 years.
Relevant to this discussion is the list of [MATLAB incompatibilities across versions](https://git.dynare.org/Dynare/dynare/-/wikis/MATLAB-Versions). Here are the main benefits that would bring certain requirements:
- *R2013a*: we could get rid of the hack needed to support `intersect(…, 'stable')`
- *R2014a*: we could easily install the minimal required MATLAB version on modern GNU/Linux systems (currently we need a hack to create an artificial `eth0` device with the correct MAC address)
- *R2016a*: we could drop the support for 32-bit versions, which would halve the size of the Windows installer and simplify the build process
- *R2016b*: we could use automatic broadcasting in many places, instead of the obscure `bsxfun` syntaxWe need to decide what will be the minimal version of MATLAB required to run Dynare 4.7.
For Dynare 4.6, our policy has been to support MATLAB versions that are at most 10 years old.
Assuming that Dynare 4.7 is released in 2021, keeping the same policy would imply raising the minimal MATLAB version to R2011a or R2011b (depending on the exact release date).
But we could also decide to change our policy and support less versions. For example, we could go for a 5-years windows, which would imply R2016a or R2016b. Or we could choose something between 5 and 10 years.
Relevant to this discussion is the list of [MATLAB incompatibilities across versions](https://git.dynare.org/Dynare/dynare/-/wikis/MATLAB-Versions). Here are the main benefits that would bring certain requirements:
- *R2013a*: we could get rid of the hack needed to support `intersect(…, 'stable')`
- *R2014a*: we could easily install the minimal required MATLAB version on modern GNU/Linux systems (currently we need a hack to create an artificial `eth0` device with the correct MAC address)
- *R2016a*: we could drop the support for 32-bit versions, which would halve the size of the Windows installer and simplify the build process
- *R2016b*: we could use automatic broadcasting in many places, instead of the obscure `bsxfun` syntax4.7Sébastien VillemotSébastien Villemothttps://git.dynare.org/Dynare/dynare/-/issues/1710num_procs doesn't exist in Matalb R2019b anymore2020-02-22T17:49:35ZMichelJuillardnum_procs doesn't exist in Matalb R2019b anymoreThere is no function ``num_procs``in Matlab release 2019b
``num_procs`` is used in ``default_option_values.m`` to initialize number of threads for ``kronecker.sparse_hessian_times_B_kronecker_C``, ``perfect_foresight_problem`` and ``k_order_perturbation``
A possible alternative would be an undocumented Matlab feature: ``feature('numcores')``
Undocumented Matlab features are discussed in this old document: http://undocumentedmatlab.com/articles/undocumented-feature-function/ but is still working.There is no function ``num_procs``in Matlab release 2019b
``num_procs`` is used in ``default_option_values.m`` to initialize number of threads for ``kronecker.sparse_hessian_times_B_kronecker_C``, ``perfect_foresight_problem`` and ``k_order_perturbation``
A possible alternative would be an undocumented Matlab feature: ``feature('numcores')``
Undocumented Matlab features are discussed in this old document: http://undocumentedmatlab.com/articles/undocumented-feature-function/ but is still working.https://git.dynare.org/Dynare/dynare/-/issues/1414command options should be made local, and a new syntax should provide persist...2020-05-07T17:45:59ZHoutan Bastanicommand options should be made local, and a new syntax should provide persistent optionsAllow users the possibility to bypass the current situation where an option set in one command is perpetuated into other commands when the user doesn't explicitly pass the option again. e.g. In the following case, the second call to `command` will have options 1, 2, and 3 set even though only 1 and 3 were passed:
```
command(option1, option2);
command(option1, option3);
```
Introduce a new syntax such as
```
command(option1, option2);
command!(option1, option3);
```
which would tell the preprocessor to reset all command-specific options to their defaults before writing output. To do this, every command's options must be local to a substructure of `options_` (i.e. `options_.command.option1`, `options_.command.option2`, etc.)Allow users the possibility to bypass the current situation where an option set in one command is perpetuated into other commands when the user doesn't explicitly pass the option again. e.g. In the following case, the second call to `command` will have options 1, 2, and 3 set even though only 1 and 3 were passed:
```
command(option1, option2);
command(option1, option3);
```
Introduce a new syntax such as
```
command(option1, option2);
command!(option1, option3);
```
which would tell the preprocessor to reset all command-specific options to their defaults before writing output. To do this, every command's options must be local to a substructure of `options_` (i.e. `options_.command.option1`, `options_.command.option2`, etc.)https://git.dynare.org/Dynare/dynare/-/issues/1389Check detrending engine2019-11-14T17:38:13ZJohannes Pfeifer Check detrending engineThe mod-file
```
//-----------------------------------------------------------------------//
//---------------------- Declaring parameters ---------------------------//
//-----------------------------------------------------------------------//
parameters delta //depreciation
sigma //intertemporal elasticity
beta //discount factor
alpha //production function parameter
mu //utility parameter
theta //Calvo parameter
epsilon //elasticity
chi //indexation parameter (unused for now)
;
alpha = 0.667;
delta = 0.1;
sigma = 0.25;
beta = 0.96;
mu = 0.2;
theta = 0.5;
epsilon = 15;
chi = 0;
//-----------------------------------------------------------------------//
//----------------------- Declaring variables ---------------------------//
//-----------------------------------------------------------------------//
varexo omega //probability of remaining a worker in the next period
gamma //probability of dieing (once retired)
n //populational growth
x //rate of technological change
M_d //exogenous money supply
;
var lambda //asset distribution in the economy
pi //}these define the marginal propensity of consumption
eps //}by both retirees and workers (I'm using Gertler's notation)
OMEGA //higher case omega
R //gross interest rate
PSI //auxiliar variable
mc //marginal cost
Pi //inflation
Df //nominal dividends
Pf //nominal firm share price
price_disp //price dispersion index
;
//declaring nonstationary variables
trend_var(growth_factor= (1+x)*(1+n)/(1+n)) X; //technological progress
trend_var(growth_factor= (1+x)*(1+n)/(1+x)) N; //population
var(deflator = X*N)
Y //product
C //consumption
K //financial capital
H //non-financial capital
A //assets
;
var(deflator = X) W; //real wage
var(deflator = 1/(X*N)) P PStar; //price level and optimal price set
var(deflator = (X*N)^(1-epsilon)) g1; //auxiliary Calvo variable
var(deflator = (X*N)^(2-epsilon)) g2; //auxiliary Calvo variable
predetermined_variables K; //timing convention
//-----------------------------------------------------------------------//
//------------------------------- Model ---------------------------------//
//-----------------------------------------------------------------------//
model;
// Consumer side
//1
K(+1) = Y - C + (1 - delta)* K;
//2
(lambda - (1 - omega(+1)))*A = omega(+1)*(1-eps*pi)*lambda(-1)*R*A(-1);
//3
pi = 1 - PSI(+1) * (R(+1) * OMEGA(+1))^(sigma - 1) * beta^sigma * pi/pi(+1);
//4
eps * pi = 1 - PSI(+1) * ((R(+1))^(sigma-1)*beta^sigma*gamma(+1))*(eps*pi)/(eps(+1)*pi(+1));
//5
OMEGA = omega + (1-omega)*eps^(1/(1-sigma));
//6
H = N * W + H(+1)/((1+n(+1))*(1+x(+1))*R(+1)*OMEGA(+1)/omega(+1));
//7
C * (1 + mu^sigma * (R(+1)*Pi(+1)/(R(+1)*Pi(+1)-1))^(sigma-1)) = pi * ((1 + (eps/gamma-1) * lambda(-1)) * R * A(-1) + H(-1));
//8
A = K + 1/R * M_d(+1)/P + Pf/P;
//9
PSI = (1 + ((R*Pi-1)/(R*Pi))^(sigma-1) * mu^sigma)^(-1) / (1 + (((R(+1)*Pi(+1))-1)/(R(+1)*Pi(+1)))^(sigma-1) * mu^sigma)^(-1);
// Firm side
//10
Y = (X * N)^alpha * (K)^(1-alpha)/price_disp;
//11
W = alpha * Y / N * mc;
//12
R = (1 - alpha) * Y / K * mc + 1 - delta;
//13
mc = (1/(1-alpha))^(1-alpha)*(1/alpha)^alpha*(W/X)^(1-alpha)*(R-(1-delta))^alpha;
// Calvo pricing
//14
PStar = epsilon/(epsilon-1) * g1/g2;
//15
g1 = P^epsilon * Y * mc + theta*beta * g1(+1);
//16
g2 = P^(epsilon-1) * Y + theta*beta * g2(+1);
//17
P = (theta * P(-1)^(1-epsilon) + (1-theta) * PStar^(1-epsilon))^(1/(1-epsilon));
//18
price_disp = theta*(PStar/P)^(-epsilon)*(P/P(-1))^(epsilon) + (1-theta)*(P/P(-1))^(epsilon)*price_disp(-1);
//19
Pi = P/P(-1);
// Dividends and share prices
Df = P * Y *(1-mc);
Pf(+1) + Df(+1) = R(+1) * Pf;
end;
//-----------------------------------------------------------------------//
//--------------------------- Initial Values ----------------------------//
//-----------------------------------------------------------------------//
initval;
M_d = 1; P =1;
x = 0.01;
n = 0.01;
omega = 0.97;
gamma = 0.9;
lambda =0.3878;
pi =0.2394;
eps =1.2832;
OMEGA =1.0124;
R =1.3968;
PSI =0.9988;
mc =0.9064;
Y =0.7407;
C =0.6857;
K =0.459;
H =1.4279;
A =1.365;
P =0.972;
PStar =0.9364;
W =0.448;
Pi =0.98;
Df =0.0681;
Pf =0.1732;
price_disp=1.0336;
g1 =0.601;
g2 =0.6877;
end;
model_diagnostics;
steady;
endval;
gamma = 0.94;
end;
steady;
simul(periods=300);
```
from http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=14206 does not run with
```
ERROR: the second-order cross partial of equation 14 w.r.t. trend variable X and endogenous variable PStar is not null.
```
but the relevant equation
```
PStar = epsilon/(epsilon-1) * g1/g2;
```
should have the trends specified (as far as I can see). `g1/g2=((X*N)^(1-epsilon))/((X*N)^(2-epsilon)=(XN)^(-1)`, which is the trend for `PStar`.The mod-file
```
//-----------------------------------------------------------------------//
//---------------------- Declaring parameters ---------------------------//
//-----------------------------------------------------------------------//
parameters delta //depreciation
sigma //intertemporal elasticity
beta //discount factor
alpha //production function parameter
mu //utility parameter
theta //Calvo parameter
epsilon //elasticity
chi //indexation parameter (unused for now)
;
alpha = 0.667;
delta = 0.1;
sigma = 0.25;
beta = 0.96;
mu = 0.2;
theta = 0.5;
epsilon = 15;
chi = 0;
//-----------------------------------------------------------------------//
//----------------------- Declaring variables ---------------------------//
//-----------------------------------------------------------------------//
varexo omega //probability of remaining a worker in the next period
gamma //probability of dieing (once retired)
n //populational growth
x //rate of technological change
M_d //exogenous money supply
;
var lambda //asset distribution in the economy
pi //}these define the marginal propensity of consumption
eps //}by both retirees and workers (I'm using Gertler's notation)
OMEGA //higher case omega
R //gross interest rate
PSI //auxiliar variable
mc //marginal cost
Pi //inflation
Df //nominal dividends
Pf //nominal firm share price
price_disp //price dispersion index
;
//declaring nonstationary variables
trend_var(growth_factor= (1+x)*(1+n)/(1+n)) X; //technological progress
trend_var(growth_factor= (1+x)*(1+n)/(1+x)) N; //population
var(deflator = X*N)
Y //product
C //consumption
K //financial capital
H //non-financial capital
A //assets
;
var(deflator = X) W; //real wage
var(deflator = 1/(X*N)) P PStar; //price level and optimal price set
var(deflator = (X*N)^(1-epsilon)) g1; //auxiliary Calvo variable
var(deflator = (X*N)^(2-epsilon)) g2; //auxiliary Calvo variable
predetermined_variables K; //timing convention
//-----------------------------------------------------------------------//
//------------------------------- Model ---------------------------------//
//-----------------------------------------------------------------------//
model;
// Consumer side
//1
K(+1) = Y - C + (1 - delta)* K;
//2
(lambda - (1 - omega(+1)))*A = omega(+1)*(1-eps*pi)*lambda(-1)*R*A(-1);
//3
pi = 1 - PSI(+1) * (R(+1) * OMEGA(+1))^(sigma - 1) * beta^sigma * pi/pi(+1);
//4
eps * pi = 1 - PSI(+1) * ((R(+1))^(sigma-1)*beta^sigma*gamma(+1))*(eps*pi)/(eps(+1)*pi(+1));
//5
OMEGA = omega + (1-omega)*eps^(1/(1-sigma));
//6
H = N * W + H(+1)/((1+n(+1))*(1+x(+1))*R(+1)*OMEGA(+1)/omega(+1));
//7
C * (1 + mu^sigma * (R(+1)*Pi(+1)/(R(+1)*Pi(+1)-1))^(sigma-1)) = pi * ((1 + (eps/gamma-1) * lambda(-1)) * R * A(-1) + H(-1));
//8
A = K + 1/R * M_d(+1)/P + Pf/P;
//9
PSI = (1 + ((R*Pi-1)/(R*Pi))^(sigma-1) * mu^sigma)^(-1) / (1 + (((R(+1)*Pi(+1))-1)/(R(+1)*Pi(+1)))^(sigma-1) * mu^sigma)^(-1);
// Firm side
//10
Y = (X * N)^alpha * (K)^(1-alpha)/price_disp;
//11
W = alpha * Y / N * mc;
//12
R = (1 - alpha) * Y / K * mc + 1 - delta;
//13
mc = (1/(1-alpha))^(1-alpha)*(1/alpha)^alpha*(W/X)^(1-alpha)*(R-(1-delta))^alpha;
// Calvo pricing
//14
PStar = epsilon/(epsilon-1) * g1/g2;
//15
g1 = P^epsilon * Y * mc + theta*beta * g1(+1);
//16
g2 = P^(epsilon-1) * Y + theta*beta * g2(+1);
//17
P = (theta * P(-1)^(1-epsilon) + (1-theta) * PStar^(1-epsilon))^(1/(1-epsilon));
//18
price_disp = theta*(PStar/P)^(-epsilon)*(P/P(-1))^(epsilon) + (1-theta)*(P/P(-1))^(epsilon)*price_disp(-1);
//19
Pi = P/P(-1);
// Dividends and share prices
Df = P * Y *(1-mc);
Pf(+1) + Df(+1) = R(+1) * Pf;
end;
//-----------------------------------------------------------------------//
//--------------------------- Initial Values ----------------------------//
//-----------------------------------------------------------------------//
initval;
M_d = 1; P =1;
x = 0.01;
n = 0.01;
omega = 0.97;
gamma = 0.9;
lambda =0.3878;
pi =0.2394;
eps =1.2832;
OMEGA =1.0124;
R =1.3968;
PSI =0.9988;
mc =0.9064;
Y =0.7407;
C =0.6857;
K =0.459;
H =1.4279;
A =1.365;
P =0.972;
PStar =0.9364;
W =0.448;
Pi =0.98;
Df =0.0681;
Pf =0.1732;
price_disp=1.0336;
g1 =0.601;
g2 =0.6877;
end;
model_diagnostics;
steady;
endval;
gamma = 0.94;
end;
steady;
simul(periods=300);
```
from http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=14206 does not run with
```
ERROR: the second-order cross partial of equation 14 w.r.t. trend variable X and endogenous variable PStar is not null.
```
but the relevant equation
```
PStar = epsilon/(epsilon-1) * g1/g2;
```
should have the trends specified (as far as I can see). `g1/g2=((X*N)^(1-epsilon))/((X*N)^(2-epsilon)=(XN)^(-1)`, which is the trend for `PStar`.4.6Sébastien VillemotSébastien Villemothttps://git.dynare.org/Dynare/dynare/-/issues/1377Decide on treatment of qz_criterium in estimation with particle filter2019-06-19T15:37:45ZJohannes Pfeifer Decide on treatment of qz_criterium in estimation with particle filterCurrently, if a unit root is present, estimation with `order=2` will result in an error. Using `diffuse_filter` will disable the check, but obviously makes no sense for particle filtering. See http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=13126Currently, if a unit root is present, estimation with `order=2` will result in an error. Using `diffuse_filter` will disable the check, but obviously makes no sense for particle filtering. See http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=131264.6https://git.dynare.org/Dynare/dynare/-/issues/1373Decide on whether evalute_smoother (and others) should set M_.params2019-06-19T15:37:45ZJohannes Pfeifer Decide on whether evalute_smoother (and others) should set M_.paramsThis picks up the discussion in https://github.com/DynareTeam/dynare/pull/1372#issuecomment-271336355
I agree with @MichelJuillard that changing `M_.params` in various functions is a bad idea as it makes it hard to trace what was going on in the mod-file. At the same time, I agree with @rattoma that keeping `M_.params` unchanged when calling `evaluate_smoother` would imply a break with previous versions and therefore mean a loss in backward compatibility. I could live with that, but usually @MichelJuillard prefers to be cautious in the regard. If we want to preserve backward compatibility, we need to make sure that `shock_decomposition` returns `M_` from `evaluate_smoother` to the base workspace, which was broken by https://github.com/DynareTeam/dynare/commit/2f717b5adc5a87f663c5c080f2963d1f65d1933eThis picks up the discussion in https://github.com/DynareTeam/dynare/pull/1372#issuecomment-271336355
I agree with @MichelJuillard that changing `M_.params` in various functions is a bad idea as it makes it hard to trace what was going on in the mod-file. At the same time, I agree with @rattoma that keeping `M_.params` unchanged when calling `evaluate_smoother` would imply a break with previous versions and therefore mean a loss in backward compatibility. I could live with that, but usually @MichelJuillard prefers to be cautious in the regard. If we want to preserve backward compatibility, we need to make sure that `shock_decomposition` returns `M_` from `evaluate_smoother` to the base workspace, which was broken by https://github.com/DynareTeam/dynare/commit/2f717b5adc5a87f663c5c080f2963d1f65d1933ehttps://git.dynare.org/Dynare/dynare/-/issues/1366Decide on how to deal with mistake in manual regarding updated variables2019-06-19T15:37:45ZJohannes Pfeifer Decide on how to deal with mistake in manual regarding updated variablesAccording to the manual, `smoother` triggers the computation of `oo_.UpdatedVariables`. But one actually needs `filtered_vars`. We can either
1. Correct the description in the manual to reflect the code behavior
2. Flag this as a bug as the code deviates from the manual and output `oo_.UpdatedVariables` when only the `smoother` option is specifiedAccording to the manual, `smoother` triggers the computation of `oo_.UpdatedVariables`. But one actually needs `filtered_vars`. We can either
1. Correct the description in the manual to reflect the code behavior
2. Flag this as a bug as the code deviates from the manual and output `oo_.UpdatedVariables` when only the `smoother` option is specifiedhttps://git.dynare.org/Dynare/dynare/-/issues/1332Decide on how to deal with mh_recover on Octave2019-06-19T15:37:45ZJohannes Pfeifer Decide on how to deal with mh_recover on OctaveVarious unit test fail on Octave, because the `mh_recover` option does not work properly under Octave as there are differences in setting the random number generator. We can either
- disable the check in the unit test and accept that the behavior of `mh_recover` is different under Octave and Matlab (and then document this)
- or provide an error under Octave when someone tries to use this optionVarious unit test fail on Octave, because the `mh_recover` option does not work properly under Octave as there are differences in setting the random number generator. We can either
- disable the check in the unit test and accept that the behavior of `mh_recover` is different under Octave and Matlab (and then document this)
- or provide an error under Octave when someone tries to use this option4.5https://git.dynare.org/Dynare/dynare/-/issues/1296Decide on whether to save intermediate draws2019-06-19T15:37:47ZJohannes Pfeifer Decide on whether to save intermediate drawsWith the move to `posterior_sampling_core` we now by default save the MCMC draws every 50 draws into a temporary file, because we by default set
`posterior_sampler_options.save_tmp_file=1;`
I think this is very inefficient and therefore should be 0 by default (same behavior as before the move), with an interface provided to change the option.
@rattoma You added this behavior. Was the reason that `slice` should be treated differently?
With the move to `posterior_sampling_core` we now by default save the MCMC draws every 50 draws into a temporary file, because we by default set
`posterior_sampler_options.save_tmp_file=1;`
I think this is very inefficient and therefore should be 0 by default (same behavior as before the move), with an interface provided to change the option.
@rattoma You added this behavior. Was the reason that `slice` should be treated differently?
https://git.dynare.org/Dynare/dynare/-/issues/1252do we need to remove dynamic exception specifications?2019-08-14T12:13:30ZMichelJuillarddo we need to remove dynamic exception specifications?dynamic exceptions specification is now deprecated in C++
In mexFunction, when an unknown exception occurs, Matlab or Octave may crash
Maybe we should remove them from the mexFunction code. I don't see very well their contribution.
dynamic exceptions specification is now deprecated in C++
In mexFunction, when an unknown exception occurs, Matlab or Octave may crash
Maybe we should remove them from the mexFunction code. I don't see very well their contribution.
https://git.dynare.org/Dynare/dynare/-/issues/1229external functions and third order perturbation2019-06-19T15:37:49ZStéphane Adjemianstepan@adjemian.euexternal functions and third order perturbationIt appears that we did not implement the possibility to use external functions when solving DSGE models at third order. I thought that when the derivates are not provided by the user, Dynare computed the derivates numerically. It seems that this mechanism is not triggered at third order. Is this intentional?
It appears that we did not implement the possibility to use external functions when solving DSGE models at third order. I thought that when the derivates are not provided by the user, Dynare computed the derivates numerically. It seems that this mechanism is not triggered at third order. Is this intentional?
https://git.dynare.org/Dynare/dynare/-/issues/1210Allow string arrays to be passed to options2018-11-09T14:13:22ZHoutan BastaniAllow string arrays to be passed to optionsFollowing the discussion in #1199, allow the preprocessor to accept string array values: `['a' 'b' 'c']`
Following the discussion in #1199, allow the preprocessor to accept string array values: `['a' 'b' 'c']`
Houtan BastaniHoutan Bastanihttps://git.dynare.org/Dynare/dynare/-/issues/1093Discuss changing options_.hp_ngrid2020-01-20T17:41:57ZJohannes Pfeifer Discuss changing options_.hp_ngridThe option `options_.hp_ngrid` is now badly named after introducing a `bandpass_filter` option. It actually governs the number of points used in the inverse Fourier transform for any filter (see #1011).
I would suggest creating a new option `ifft_points` in the options structure and the preprocessor. For backward compatibility we should keep `hp_ngrid` in the preprocesor, but have it now map into `options_.ifft_points`
The option `options_.hp_ngrid` is now badly named after introducing a `bandpass_filter` option. It actually governs the number of points used in the inverse Fourier transform for any filter (see #1011).
I would suggest creating a new option `ifft_points` in the options structure and the preprocessor. For backward compatibility we should keep `hp_ngrid` in the preprocesor, but have it now map into `options_.ifft_points`
4.6Sébastien VillemotSébastien Villemothttps://git.dynare.org/Dynare/dynare/-/issues/1063Make output of dsge_var_likelihood accessible2019-11-21T08:36:44ZJohannes Pfeifer Make output of dsge_var_likelihood accessibleSee the discussions in http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=7315 and http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=2920
See the discussions in http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=7315 and http://www.dynare.org/phpBB3/viewtopic.php?f=1&t=2920
https://git.dynare.org/Dynare/dynare/-/issues/1031declare all options_ fields as empty/0/NaN in global_initialization2019-11-21T08:36:43ZHoutan Bastanideclare all options_ fields as empty/0/NaN in global_initializationFollowing the discussion on pr #1030, we must decide whether or not we want to do this and implement it throughout the code (or not)
Following the discussion on pr #1030, we must decide whether or not we want to do this and implement it throughout the code (or not)
https://git.dynare.org/Dynare/dynare/-/issues/1024Save posterior moments even when moments are constant2019-06-19T15:37:56ZJohannes Pfeifer Save posterior moments even when moments are constantIn `covariance_mc_analysis.m` and the like we test whether the moments are constant and, if yes, we store NaN. I don't see the logic of this. All moments are still well-defined (although identical). I would propose to get rid of this check and always store the computed moments.
In `covariance_mc_analysis.m` and the like we test whether the moments are constant and, if yes, we store NaN. I don't see the logic of this. All moments are still well-defined (although identical). I would propose to get rid of this check and always store the computed moments.
https://git.dynare.org/Dynare/dynare/-/issues/1012Add one-sided HP filter2019-06-19T15:37:56ZJohannes Pfeifer Add one-sided HP filter#1011 already implemented the interface. Before adding the function, we need to decide whether to simply add it as a function that operates on regular double data like the `sample_hp_filter` or whether we want to make it a function on dseries objects as the `baxter_king_filter.m` of the dseries submodule.
#1011 already implemented the interface. Before adding the function, we need to decide whether to simply add it as a function that operates on regular double data like the `sample_hp_filter` or whether we want to make it a function on dseries objects as the `baxter_king_filter.m` of the dseries submodule.
https://git.dynare.org/Dynare/dynare/-/issues/827Feature request: Implement the algorithm of Ajevskis (2014) for perturbation ...2019-11-21T08:36:41ZTom HoldenFeature request: Implement the algorithm of Ajevskis (2014) for perturbation around a deterministic pathViktors Ajevskis has a [great new paper](https://ideas.repec.org/p/ltv/wpaper/201401.html) showing how the Lombardo pruning method may be extended to support perturbation around a deterministic path. This seems like a feature that would be a huge benefit to virtually all Dynare users, since it makes it possible to e.g.:
- Solve non-stationary DSGE models, such as those featuring structural change.
- Evaluate the welfare consequences of a permanent change in policy, without sacrificing accuracy along the transition path.
- Obtain increased accuracy for large impulse response exercises.
- Unify the stochastic and non-stochastic simulation engines in Dynare.
It would be great if this could be added to the bottom of your very long to do list!
https://ideas.repec.org/p/ltv/wpaper/201401.html
Viktors Ajevskis has a [great new paper](https://ideas.repec.org/p/ltv/wpaper/201401.html) showing how the Lombardo pruning method may be extended to support perturbation around a deterministic path. This seems like a feature that would be a huge benefit to virtually all Dynare users, since it makes it possible to e.g.:
- Solve non-stationary DSGE models, such as those featuring structural change.
- Evaluate the welfare consequences of a permanent change in policy, without sacrificing accuracy along the transition path.
- Obtain increased accuracy for large impulse response exercises.
- Unify the stochastic and non-stochastic simulation engines in Dynare.
It would be great if this could be added to the bottom of your very long to do list!
https://ideas.repec.org/p/ltv/wpaper/201401.html
https://git.dynare.org/Dynare/dynare/-/issues/814Decide upon what to do stale mode_compute options2019-06-19T15:38:02ZJohannes Pfeifer Decide upon what to do stale mode_compute optionsIn the process of factorizing the optimization calls (see #800), we should clean up. Currently, `mode_compute==2,101,102` are broken/not supported anymore. 2 and 102 are non-existing simulated annealings. I would propose to drop 102 and replace 2 by Matlab's
`simulannealbnd` from the Global Optimization Toolbox. That way we would have at least one simulated annealing available.
I have no clue why we have the undocumented 101 which is `solveopt` and would suggest to drop it.
In the process of factorizing the optimization calls (see #800), we should clean up. Currently, `mode_compute==2,101,102` are broken/not supported anymore. 2 and 102 are non-existing simulated annealings. I would propose to drop 102 and replace 2 by Matlab's
`simulannealbnd` from the Global Optimization Toolbox. That way we would have at least one simulated annealing available.
I have no clue why we have the undocumented 101 which is `solveopt` and would suggest to drop it.