Skip to content
Snippets Groups Projects
Select Git revision
  • nlf-fixes
  • newton-quadratic-equation-solver
  • master default
  • nlf-fixes-r
  • nls-fixes
  • sep-fixes
  • sep
  • use-dprior
  • ep-sparse
  • rebase-1
  • parfor
  • reset-seed-in-unit-tests
  • remove-persistent-variables
  • nonlinear-filter-fixes
  • pac-mce-with-composite-target
  • 6.x
  • dprior
  • covariance-quadratic-approximation
  • benchmark-ec
  • kalman_mex
  • 5.5
  • 5.4
  • 5.3
  • 5.2
  • 5.1
  • 5.0
  • 5.0-rc1
  • 4.7-beta3
  • 4.7-beta2
  • 4.7-beta1
  • 4.6.4
  • 4.6.3
  • 4.6.2
  • 4.6.1
  • 4.6.0
  • 4.6.0-rc2
  • 4.6.0-rc1
  • 4.6-beta1
  • 4.5.7
  • 4.5.6
40 results

dynare

  • Clone with SSH
  • Clone with HTTPS
  • Forked from Dynare / dynare
    5427 commits behind the upstream repository.

    Dynare

    Described on the homepage: http://www.dynare.org/

    Most users should use the precompiled package available for your OS, also available via the Dynare homepage: http://www.dynare.org/download/dynare-stable.

    Contributions

    To contribute to Dynare and participate in the Dynare community, please see: CONTRIBUTING.md

    License

    Most of the source files are covered by the GNU General Public Licence version 3 or later (there are some exceptions to this, see license.txt in Dynare distribution for specifics).

    Building Dynare From Source

    Here, we explain how to build from source:

    • Dynare, including preprocessor and MEX files for MATLAB and Octave
    • Dynare++
    • all the associated documentation (PDF and HTML)

    This source can be retrieved in three forms:

    Note that if you obtain the source code via git, you will need to install more tools (see below).

    The first section of this page gives general instructions, which apply to all platforms. Then some specific platforms are discussed.

    Note: Here, when we refer to 32-bit or 64-bit, we refer to the type of MATLAB installation, not the type of Windows installation. It is perfectly possible to run a 32-bit MATLAB on a 64-bit Windows: in that case, instructions for Windows 32-bit should be followed. To determine the type of your MATLAB installation, type:

    >> computer

    at the MATLAB prompt: if it returns PCWIN64, GLNX64 or MACI64, then you have a 64-bit MATLAB; if it returns PCWIN, MACI or GLNX, then you have a 32-bit MATLAB.

    Contents

    1. General Instructions
    2. Debian or Ubuntu
    3. Windows
    4. macOS

    General Instructions

    Prerequisites

    A number of tools and libraries are needed in order to recompile everything. You don't necessarily need to install everything, depending on what you want to compile.

    • A POSIX compliant shell and an implementation of Make (mandatory)
    • The GNU Compiler Collection, with gcc, g++ and gfortran (mandatory)
    • MATLAB (if you want to compile the MEX for MATLAB)
    • GNU Octave, with the development headers (if you want to compile the MEX for Octave)
    • Boost libraries, version 1.36 or later (with the filesystem library compiled)
    • Bison, version 3.0 or later (only if you get the source through Git)
    • Flex, version 2.5.4 or later (only if you get the source through Git)
    • Autoconf, version 2.62 or later (only if you get the source through Git) (see Installing an updated version of Autoconf in your own directory, in GNU/Linux)
    • Automake, version 1.11.2 or later (only if you get the source through Git) (see Installing an updated version of AutoMake in your own directory, in GNU/Linux)
    • CWEB, with its tools ctangle and cweave (only if you want to build the k-order DLL or Dynare++, and get the source through Git)
    • An implementation of BLAS and LAPACK: either ATLAS, OpenBLAS, Netlib (BLAS, LAPACK) or MKL (only if you want to build Dynare++)
    • An implementation of POSIX Threads (optional, for taking advantage of multi-core)
    • MAT File I/O library (if you want to compile Markov-Switching code, the estimation DLL, k-order DLL and Dynare++)
    • SLICOT (if you want to compile the Kalman steady state DLL)
    • GSL library (if you want to compile Markov-Switching code)
    • A decent LaTeX distribution (if you want to compile PDF documentation). The following extra components may be needed:
      • Eplain TeX macros (only if you want to build Dynare++ source documentation)
      • Beamer (for some PDF presentations)
    • For building the reference manual:
      • GNU Texinfo
      • Latex2HTML, if you want nice mathematical formulas in HTML output
      • Doxygen (if you want to build Dynare preprocessor source documentation)
    • For Octave, the development libraries corresponding to the UMFPACK packaged with Octave

    Preparing the sources

    If you have downloaded the sources from an official source archive or the source snapshot, just unpack it.

    If you want to use Git, do the following from a terminal:

    git clone --recursive https://git.dynare.org/Dynare/dynare.git
    cd dynare
    autoreconf -si

    The last line runs Autoconf and Automake in order to prepare the build environment (this is not necessary if you got the sources from an official source archive or the source snapshot).

    Configuring the build tree

    Simply launch the configure script from a terminal:

    ./configure

    If you have MATLAB, you need to indicate both the MATLAB location and version. For example, on GNU/Linux:

    ./configure --with-matlab=/usr/local/MATLAB/R2013a MATLAB_VERSION=8.1

    Note that the MATLAB version can also be specified via the MATLAB family product release (R2009a, R2008b, ...).

    Alternatively, you can disable the compilation of MEX files for MATLAB with the --disable-matlab flag, and MEX files for Octave with --disable-octave.

    You may need to specify additional options to the configure script, see the platform specific instructions below.

    Note that if you don't want to compile the C/C++ programs with debugging information, you can specify the CFLAGS and CXXFLAGS variables to the configure script, such as:

    ./configure CFLAGS="-O3" CXXFLAGS="-O3"

    To remove debugging information for MATLAB MEX functions, the analagous call would be:

    ./configure MATLAB_MEX_CFLAGS="-O3" MATLAB_MEX_CXXFLAGS="-O3"

    If you want to give a try to the parallelized versions of some mex files (A_times_B_kronecker_C and sparse_hessian_times_B_kronecker_C used to get the reduced form of the second order approximation of the model) you can add the --enable-openmp flag, for instance:

    ./configure --with-matlab=/usr/local/MATLAB/R2013a MATLAB_VERSION=8.1 --enable-openmp

    If the configuration goes well, the script will tell you which components are correctly configured and will be built.

    Building

    Binaries and Info documentation are built with:

    make

    PDF and HTML documentation are respectively built with:

    make pdf
    make html

    The testsuites can be run with:

    make check

    Note that running the testsuite with Octave requires the additional packages pstoedit, epstool, xfig, and gnuplot.

    Check

    The Git source comes with unit tests (in the MATLAB functions) and integration tests (under the tests subfolder). All the tests can be run with:

    make check

    In the tests subfolder. If Dynare has been compiled against MATLAB and Octave, the tests will be run with MATLAB and Octave. Depending on your PC, this can take several hours. It is possible to run the tests only with MATLAB:

    make check-matlab

    or only with Octave:

    make check-octave

    A summary of the results is available in tests/run_test_matlab_output.txt or tests/run_test_octave_output.txt. Often, it does not make sense to run the complete testsuite. For instance, if you modify codes only related to the perfect foresight model solver, you can decide to run only a subset of the integration tests, with:

    make deterministic_simulations

    This will run all the integration tests in tests/deterministic_simulations with MATLAB and Octave. Again, it is possible to do this only with MATLAB:

    make m/deterministic_simulations

    or with Octave:

    make o/deterministic_simulations

    Finally if you want to run a single integration test, e.g. deterministic_simulations/lbj/rbc.mod with MATLAB:

    make deterministic_simulations/lbj/rbc.m.trs

    or with Octave:

    make deterministic_simulations/lbj/rbc.o.trs

    The result of the test (PASSED or FAILED) will be printed in the terminal, the produced log can be displayed with:

    make deterministic_simulations/lbj/rbc.m.drs

    or

    make deterministic_simulations/lbj/rbc.o.drs

    Note that only tests will be executed where the m.trs/o.trs does not yet exist. You can run

    make clean

    in the tests folder to delete files that were created by the run of the testsuite. You can also manually delete the desired m.trs/o.trs file(s).

    Debian or Ubuntu

    All the prerequisites are packaged:

    • build-essential (for gcc, g++ and make)
    • gfortran
    • liboctave-dev
    • libboost-graph-dev and libboost-filesystem-dev
    • libgsl-dev
    • libmatio-dev
    • libslicot-dev and libslicot-pic
    • libsuitesparse-dev
    • flex
    • bison
    • autoconf
    • automake
    • texlive
    • texlive-publishers (for Econometrica bibliographic style)
    • texlive-extra-utils (for CWEB)
    • texlive-formats-extra (for Eplain)
    • texlive-latex-extra (for fullpage.sty)
    • texlive-fonts-extra (for ccicons)
    • texlive-latex-recommended
    • texlive-science (for amstex)
    • texinfo
    • lmodern (for macroprocessor PDF)
    • latex2html
    • doxygen

    You can install them all at once with:

    apt install build-essential gfortran liboctave-dev libboost-graph-dev libboost-filesystem-dev libgsl-dev libmatio-dev libslicot-dev libslicot-pic libsuitesparse-dev flex bison autoconf automake texlive texlive-publishers texlive-extra-utils texlive-formats-extra texlive-latex-extra texlive-fonts-extra texlive-latex-recommended texlive-science texinfo lmodern latex2html doxygen

    Windows

    • Install MSYS2 (pick the 64-bit version)
    • Run a MSYS MinGW 64-bit shell
    • Update the system:
    pacman -Syu

    You may be asked to close the window at the end of the first upgrade batch, in which case you should rerun the upgrade in a new window to complete the upgrade.

    • Install all needed dependencies:
    pacman -S git autoconf automake-wrapper bison flex make tar texinfo mingw-w64-x86_64-gcc mingw-w64-x86_64-gcc-fortran mingw-w64-x86_64-boost mingw-w64-x86_64-gsl mingw-w64-x86_64-matio mingw-w64-x86_64-openblas
    • (Optional) compile and install ctangle, needed for the k-order MEX file and for Dynare++ (i.e. if you want to solve models at order ≥ 3)
    wget ftp://ftp.cs.stanford.edu/pub/cweb/cweb.tar.gz
    mkdir cweb
    cd cweb
    tar xf ../cweb.tar.gz
    make ctangle
    mkdir -p /usr/local/bin
    cp ctangle.exe /usr/local/bin/
    cd ..
    • (Optional) compile and install SLICOT, needed for the kalman_steady_state MEX file
    wget https://deb.debian.org/debian/pool/main/s/slicot/slicot_5.0+20101122.orig.tar.gz
    tar xf slicot_5.0+20101122.orig.tar.gz
    cd slicot-5.0+20101122
    make FORTRAN=gfortran OPTS="-O2 -fno-underscoring -fdefault-integer-8" LOADER=gfortran slicot.a
    mkdir -p /usr/local/lib
    cp slicot.a /usr/local/lib/libslicot64_pic.a
    cd ..
    • Clone and prepare the Dynare sources:
    git clone --recursive https://git.dynare.org/Dynare/dynare.git
    cd dynare
    autoreconf -si
    • Configure Dynare:
    ./configure --with-boost-system=boost_system-mt --with-boost-filesystem=boost_filesystem-mt --with-slicot=/usr/local --with-matlab=<…> MATLAB_VERSION=<…> --disable-octave

    where the path and version of MATLAB are specified. Note that you should use the MSYS2 notation and not put spaces in the MATLAB path, so you probably want to use something like /c/Progra~1/MATLAB/….

    • Compile:
    make
    • Run the testsuite:
    make -C tests check-matlab

    Note: The above assumes that you have a 64-bit version of MATLAB. It can be adapted to a 32-bit MATLAB with the following modifications:

    • run the MSYS MinGW 32-bit shell
    • replace x86_64 by i686 in packages names on the pacman command-line
    • for SLICOT, remove the -fdefault-integer-8 option, and instead copy the library into /usr/local/lib/libslicot_pic.a

    Note: Compiling the MEX files for Octave and the documentation under MSYS2 is currently not supported.

    macOS

    To simply use a snapshot of Dynare, you have two choices. On MATLAB, you can use the snapshot build provided by Dynare. On Octave, you can simply install Homebrew and run brew install dynare --HEAD (See the Install Dynare (unstable) section of this webpage for more details).

    If you do not wish to use the snapshots provided by Dynare or Homebrew, follow the directions below to build Dynare on your local machine.

    Preparatory work:

    • Install the Xcode Command Line Tools:
      • Open Terminal.app and type xcode-select --install
    • Install Homebrew by following the instructions on their website

    The following commands will install the programs that Dynare needs to compile. They should be entered at the command prompt in Terminal.app.

    • brew install automake bison flex boost fftw gcc gsl hdf5 libmatio metis veclibfort
    • (Optional) To compile Dynare mex files for use on Octave:
      • brew install octave
      • brew install suite-sparse
    • (Optional) To compile Dynare++
      • brew install cweb
    • (Optional) To compile Dynare documentation
      • Install the latest version of MacTeX, deselecting the option to install Ghostscript
      • brew install doxygen latex2html

    The following commands will download the Dynare source code and compile it. They should be entered at the command prompt in Terminal.app from the folder where you want Dynare installed.

    • git clone https://git.dynare.org/Dynare/dynare.git
    • cd dynare
    • PATH="/usr/local/opt/bison/bin:/usr/local/opt/flex/bin:$PATH"
    • autoreconf -si
    • ./configure --disable-octave --with-matlab=/Applications/MATLAB_R2017b.app MATLAB_VERSION=R2017b, adjusting the MATLAB path and version to accord with your local installation. If you don't have MATLAB, simply type ./configure --disable-octave
    • make -j
    • (Optional) To then build mex files for Octave, run
      • cd mex/build/octave
      • ./configure CXXFLAGS="-std=c++0x"
      • make -j